Uni interlock paver
The S-shaped paver that locks to its neighbours on every side. The surface spreads wheel loads, so it stays flat under cars and lorries. Our first choice for driveways and yards.
| Specification | Value |
|---|---|
| Size | 220 × 110 × 80 mm |
| Thickness | 80 mm |
| Shape | S-shape (interlocking) |
| Pieces per m² (nominal, derived from size, no joint allowance) | about 41 per m² |
| Standard colour | Grey |
| Made-to-order colours | Red, charcoal, yellow |
| Recommended pattern | Herringbone for driveways; stretcher bond for paths |
Specification
- 220 × 110 × 80 mm, S-shape
- About 41 pieces per m² by size (laid count confirmed with your quote)
- Grey standard; red, charcoal and yellow made to order
Lay it in herringbone
Herringbone locks the blocks in both directions, so turning and braking cars do not push them apart. Use stretcher bond on paths.
Paving patternsWhat goes under it
A compacted sub-base, a sand bed, an edge restraint all round, and sand swept into the joints after compaction. The paver is only as good as the base.